Introduction – Fujimoto Fuji Differential Pressure Transmitter FKK 4 User Manual

Page 2

Advertising
background image

i

INTRODUCTION

Thank you very much for your purchase of the Fuji FCX-CII Series Transmitter.

This instruction manual covers the FCX-CII series transmitter and contains information about the

installation, piping, wiring, operation and maintenance of the FCX-CII series (FKK...4 • FKP...4 •

FKP...E).

The product conforms to the requirements of the

Electromagnetic compatibility Directive 89/336/EEC as

detailed within the technical construction file number

TN513035. The applicable standards used to demonstrate

compliance are :-

EN 50081-2 :-1993

Conducted and Radiated emissions

EN 50082-2 :-1995

Radiated immunity, ESD and FBT

• First read this instruction manual carefully until an adequate understanding is required, and then

proceed to installation, operation and maintenance of the FCX-CII Series transmitter.

• The specifications of the transmitter will be changed without prior notice for further product

improvement.

• Modification of the transmitter without permission is strictly prohibited. Fuji will not bear any

responsibility for a trouble caused by such a modification.

• This instruction manual should be kept by a person who is actually using the transmitter.

• After reading this manual, keep it at a place easier to access.

• This manual should be delivered to the end user without fail.

• For detail specifications and outline diagrams, refer to the specifications furnished separately.

INTRODUCTION

Manufacturer:

Fuji Electric France

Type:

Described in nameplate on main frame (see Page v)

Date of manufacture:

Described in nameplate on main frame

Product nationality:

France

Request

• Transcription of a part or the whole of this manual without per-

mission is prohibited.

• The contents of this manual are subject to change without prior

notice.

© Fuji Electric France 2002

Issued in February, 2002

Advertising