Fujimoto Fuji Differential Pressure Transmitter FKK 4 - Manual (Page 5)

iv
Storage for a long period
Store the transmitter in a dry room at normal temperature and humidity.
Keep protection caps in place at the conduit connection and process connection.
For installation, select an appropriate place
Site at location with minimal vibration, dust and corrosive gas
At a place allowing an adequate space for checkup
Site at location large enough to allow maintenance and checking.
Mounting angle
Mount to a pipe horizontally or vertically.
Attention to overload
Do not apply a pressure outside the specified range.
Other
Besides the above, be sure to observe the cautions given in this manual.
The instrument nameplate as shown below is attached at the transmission unit of this transmitter. Before
use, make sure the contents of the nameplate agree exactly with your specifications.
CONFIRMATION OF YOUR SPECIFICATION
Series
Tag No.
Fuji Electric Co., Ltd. Made in Japan
Type
Range
Power Supply
Output 4 ... 20mADC
M.W.P.
Ser.No.
Mfd.
Be sure to observe the following Instructions
CAUTION ON USE