Fostex DV824 - Manual (Page 118)

118
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
The "Pull Up/Down" menu item makes clock pull up/down setting when the unit is referenced
to the internal clock. You can also make the setting via the quick setup mode on the Home
screen. The setting is stored to the Flash ROM of the unit.
<Note>: The "Pull Up/Down" menu item is valid only when the optional TC/SYNC
card is installed. If you are going to make setting when no TC/SYNC card is installed,
the display shows "Void! No TC Card" and you cannot make setting.
You can select from among "-0.1%", "0.0%" and "+0.1%" (the default is "0.0%".)
The "Max file length" menu item sets the maximum recording volume of a file.
This setting is important especially for exporting audio file data of the unit to your PC, because
each PC has the limitation of the volume of a file to be imported.
The setting is stored to the Flash ROM of the unit.
Select the "Max file length" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
You can select from among "2GB" and "4GB" (the default is "4GB".)
Pull up/down setting [Pull Up/Down]
Maximum file length setting [Max file length]
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting. The current setting is shown in the status information area on the Home screen.
Press the [STOP/HOME] key to exit the MENU mode.
Select the "Pull Up/Down" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
<Note>: The remaining recordable time of the file which is shown during recording
is calculated based on the "Max file length" setting. For example, if the remaining
space of the disk is 4 GB or more while "Max file length" is set to 4 GB, the remaining
recordable time of the file is calculated based on 4 GB. If the remaining space of the
disk is smaller than the "Max file length" setting, the remaining recordable time of
the file is calculated based on disk remaining space. For example, if "Max file length"
is set to 4 GB while the remaining space of the disk is 2 GB, the display shows the
remaining time which is calculated based on 2 GB.