Fostex DV824 - Manual (Page 61)

61
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
Skip/locate functions
The DV824 offers comprehensive skip/locate functions.
Skipping through files
When more than one audio file is recorded on the current DVD-RAM disk,
you can quickly skip to the beginning (ABS 0) of a desired audio file.
By pressing the [ ] or [ ] ([SKIP/CURSOR]) key while the unit is
stopped, you can skip forward or backward a file. Therefore, pressing the
[
] or [ ] key as many times as required skips to the beginning of
the desired file.
<Note>: To skip through files using the [ ] and [ ] keys, the "Skip
mode" menu item in the "SYS SETUP" menu of the MENU mode must be set to
"File" (
see page 123 for details ). The default is "File". If it is set to "CUE", change
the setting.
Skipping through cue points
You can quickly skip to a desired cue point on the current audio file.
By pressing the [ ] or [ ] ([SKIP/CURSOR]) key while the unit is
stopped, you can skip to the next or previous cue point.
Therefore, pressing the [
] or [ ] key as many times as required
skips to the desired cue point.
<Note>: To skip through cue points using the [ ] and [ ] keys, the
"Skip mode" menu item in the "SYS SETUP" menu of the MENU mode must be
set to "CUE" (
see page 123 for details ). The default is "File", so change it to
"CUE".
Locating to the beginning or end of a file
While the unit is stopped, pressing the [ REW] key while holding down
the [STOP/HOME] key locates to the beginning (ABS 0) of the current file
quickly.
While the unit is stopped, pressing the [ F FWD] key while holding
down the [STOP/HOME] key locates to the record end position (REC END)
of the current file quickly.
Locating to the last located point
While the unit is stopped, pressing the [LOCATE/ EDIT TIME ] key locates to
the point where you located last time.