Fostex DV824 - Manual (Page 91)

91
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
8) Press the [STOP/HOME] key to exit the MENU mode.
After exiting the MENU mode, the display returns to the Home screen of the
current partition, while the DV824 scans the mirror disk.
On the Home screen, you can see " " beside the name of the partition, as
shown below.
Now you are ready for dual drive recording.
Making dual drive recording
The following procedure is assumed that the selected partition (PT02) is "DDR" for-
matted and a mirror disk is set to the DVD-RAM drive.
1) Start recording to partition 2 ("PTO2").
Dual drive recording starts. The DV824 also make recording to the mirror disk in
the background, as well as recording to partition 2 ("PTO2").
2) After completing recording, press the [STOP/HOME] key to stop recording.
If recording has not been successfully made, immediately cancel by the False start
function and make recording again.
<Note>: To execute dual drive recording, you must set a mirror disk to the DVD-RAM disk
drive. If a wrong disk is set to the DVD-RAM disk drive or no disk is set, the DV824 detects
an error when scanning the mirror disk, and shows a caution message ("Difference! DDR
mirror disk", etc.). When it scans a correct mirror disk, "Presence! DDR mirror disk" is
shown.
<Note>: When starting dual drive recording, if the current drive is "Normal" formatted,
switch to a "DDR" formatted hard disk partition and set a mirror disk to the DVD-RAM
drive.
On the screen for selecting a drive, "DDR" is placed on the right of the name of the "DDR"
formatted partition. So you can easily distinguish them.