Fostex DV824 - Manual (Page 75)

75
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
4) Open the connection with the setting above, and transfer a file.
<If you use WS-FTP>
Before transferring a file, select "Binary" or "Auto" from among "ASCII",
"Binary" and "Auto" shown in the center of the window.
<If you use Fetch>
Before transferring a file, set "Mode" to "Auto" and "Format" to "RawData".
Connecting DV824 to LAN
To connect the DV824 to a LAN, use a straight cable to connect the DV824 to a hub.
For details about FTP application setting, see "Connecting DV824 directly to PC" de-
scribed above.
<Note>: If the IP address or sub net mask is not appropriately set when connecting
the DV824 to a LAN, it may give bad influence to the LAN. Consult a network admin-
istrator if you need help for setting these items appropriately.
FTP command details
The following shows usable and unusable FTP commands when you can use the DV824
as the FTP server.
<Note>: Only a single user can log in. More than one user cannot log in at the same
time.
USER Identifying user name.
PASS Identifying password.
QUIT
Terminating FTP connection. TCP connection
for Control is also cut off.
PORT
When transferring data, relay the connec-
tion state open port number for data transfer-
ring at client side to server.
Format: PORT IP1, IP2, IP3, IP4, P1, P2
(IPx: IP address, Px: port number represented
by decimal number in every 1 byte unit)
TYPE
Designating data type (ASCII, BECIDIC, BI-
NARY, LOCAL).
RETR
Instructing server to transfer file though data
connection.
STOR
Instructing server to write data transferred
through data connection into a new file.
LIST Requesting server to send a list of files.
NLST
Requesting server to send a detailed list of
files.
CWD Changing current directory.
CDUP Changing current directory to upper level.
PWD Displaying current directory.
NOOP Doing nothing.
SYST Acquire server OS type.
APPE
Instructing server to write data transferred
through data connection into an existing file
additionally.
DELE Deleting designated file.
RNFR Designating current file name for renaming.
RNTO Changing current file name for renaming.
HELP Displaying command description.
ACCT Identifying user account.
PASV
Opening command state designated port ex-
cept default data port (No, 20) on server.
STRU Designating file structure.
MODE
Designating file transfer mode (Stream,
Block, Compressed).
RMD Deleting designated directory.
MKD Creating designated directory.
STAT Requesting server condition.
• The following FTP commands can be used when
DV824 works as a FTP server. • The following FTP commands cannot be used when
DV824 works as a FTP server.