Fostex DV824 - Manual (Page 71)

71
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
The following describes necessary settings for controlling the DV824 from an exter-
nal video editor via P2/ES BUSS (RS-422).
Controlling the unit from a video editor
BI-PHASE INPUT
INPUT OUTPUT
ANALOG OUTPUT BALANCED [+4dBu]
ANALOG INPUT BALANCED [+4dBu]
1:GND
2:NC
3:NC
4:12V
THRU INPUT
ON OFF 100 Ω
8 7 6 5 4 3 2 1
1 2 3 4 5 6 7
DC-IN 12V
P2/ES BUSS 8
INPUT OUTPUT
OFF
75 Ω
REMOTE PARALLEL
TIME CODE
LEVEL SEL
24V 5V
WORD WORD
1:GND 2:HOT 3:COLD
ON
LINK TX/RX ETHERNET DIGITAL I/O AES/EBU
HOUSE SYNC
Video Editor VTR
Digital Mixer
Audio signal
Video Sync
RS422
Audio signal
Word
Video Sync
RS422
Necessary setting (RS422 SETUP menu)
To control the DV824 from an external video editor, etc., you must make necessary settings
via the "RS422 SETUP" menu of the MENU mode by following the procedure below.
1) While the unit is stopped, press the [ENTER/YES] key to enter the MENU mode.
2) Use the [MENU] dial to select the "RS422 SETUP" menu and press the [ENTER/
YES] key.
The display now shows the RS422 menu screen for selecting a menu item.
By using the [MENU] dial to select a desired menu item and pressing the [ENTER/
YES] key, you can make setting for the menu item. See the following for details of
setting for each menu item.
RS422 remote setting (Selection of the device(s) controlling the DV824)
You can select from among "Both" (default), "Local" and "Remote".
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to
confirm your selection.
Both You can control the unit from both panel keys and RS422 remote. This is the default setting.
Local
Remote
You can control the unit from panel keys. RS422 remote control is disabled.
You can control the unit from RS422 remote. Panel key control is disabled.