Fostex DV824 - Manual (Page 27)

27
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
18) [SAFE/RDY/9, W, X, Y, Z] key
Pressing this key switches the unit between the “record safe” and “record ready”
modes. When recording status, a new audio file is created and the unit records
an audio signal from the beginning of the file (ABS 0). The indicator flashes in
the record ready mode, while it lights during recording (
see page 52 for details ).
When the display shows a screen for alphanumerical character entry, this key is
used for entering "9", "W (w)", "X (x)", "Y (y)" or "Z (z)".
19) [CLEAR/ FALSE START ] key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
Pressing this key clears hold data of the level meters.
When the display shows a screen for alphanumerical character entry, this key
clears whole data.
When SHIFTed:
Pressing this key after making recording cancels the recording. It is useful when
recording has been unsuccessfully made. When the recording is canceled, the
file name is reused and the remaining time returns to the previous value (
see
page 54 for details ).
20) [ALL INPUT/8, T, U, V] key
Pressing this key turn on or off the “All input monitor” mode. Depending on the
All input monitor status, the indicator is lit (when “on”) or unlit (when “off”).
When the Auto EE mode is on, the All input monitor status automatically switches
between on and off depending on the unit status. You can set the Auto EE mode
on/off via the “Auto EE mode” menu item of the “SYS SETUP” menu in the
MENU mode (
see page 121 for details ).
When the display shows a screen for alphanumerical character entry, this key is
used for entering "8", "T (t)", "U (u)" or "V (v)".
21) [LOCATE/ EDIT TIME ] key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
Pressing this key relocates the recorder to the position previously located (if
the recorder has not located to any position before, it locates to "ABS 0").
When the display shows a screen for selecting a cue point, pressing this key
after selecting a desired cue point locates the recorder to the selected cue point
(
see page 61 for details ).
When SHIFTed:
Pressing this key brings up the TIME EDIT screen and you can edit the current
time. After then, pressing this key locates the recorder to the edited time
position (
see page 61 for details ).
22) [TIME SEL/7, P, Q, R, S/ CONTRAST ] key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
Pressing this key changes the time mode on the display among "ABS", "TC IN",
"GEN" and "LTC" in that order (
see page 51 for details ).
When the display shows a screen for alphanumerical character entry, this key is
used for entering "7", "P (p)", "Q (q)", "R (r)" or "S (s)".