Fostex DV824 - Manual (Page 120)

120
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
The "Digital out" menu item selects the format (AES/EBU or S/P DIF) of the digital signal which
is output from the [DIGITAL I/O] connector.
Select the "Digital out" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
The "Pre rec time" menu item sets the pre recording time of audio pooled in the buffer.
When starting recording while the Pre rec mode is set to "ON" (the [PRE REC] indicator lights),
recording is made from the audio pooled in the buffer. This prevents missing the start of a
take. The setting is stored to the Flash ROM of the unit.
Select the "Pre rec time" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired time.
IEC 60958 (AES/EBU) format digital signal is output. AES/EBU
SPDIF IEC 60958 (S/P DIF) format digital signal is output.
Selectable between "AES/EBU" and "S/P DIF" (the default is "AES/EBU").
You can select time between "1 sec" and "10 sec" in one-second steps. (the default is "10 sec".)
<Note>: If you execute pre recording at 88.2k or 96k FS, the pre recording time
automatically reduces to half the selected value. For example, if the pre recording
time is set to ten seconds, the buffer stores only five seconds of audio data.
Digital output signal format selection [Digital out]
Pre recording time setting [Pre rec time]
Use the [MENU] dial to select the desired format and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
Use the [MENU] dial to set the desired time and press the [ENTER/YES] key to confirm your
setting. Press the [STOP/HOME] key to exit the MENU mode.
<Note>: The digital input signal format (AES/EBU or S/P DIF) is automatically de-
tected by the unit.