Fostex DV824 - Manual (Page 154)

154
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
Using the "Resume" menu item, you can select "On" or "Off" of the resume function.
By setting it to "On", the current audio file and its playback position is stored to the
resume file when a DVD-RAM disk is ejected. Therefore, the unit automatically loads
the same audio file at the same position next time you set the same disk to the unit.
Using the "Part. protect" menu item, you can select "On" or "Off" of the software
protection (record inhibit) for the current partition.
The following procedure assumes that a partition you want to make protection set-
ting is selected as the current drive.
Resume function On/Off setting [Resume]
Partition protection On/Off setting [Part. protect]
<Note>: When a protected partition is loaded, the " " icon is shown beside the
partition number on the Home screen, as well as beside the partition name on the
drive select screen (as shown below).
<Note>: If the optional hard disk drive is not installed or a partition is not selected
as the current drive, "---" is shown.
Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your
setting. Press the [STOP/HOME] key to exit the MENU mode.
Select the "Resume" menu item and press the [ENTER/YES] key.
The current setting ("On" or "Off") starts flashing (the default is "Off") and you can now select
the desired option.
Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your
setting. Press the [STOP/HOME] key to exit the MENU mode.
Select the "Part. protect" menu item and press the [ENTER/YES] key.
The current setting ("On" or "Off") starts flashing and you can now select the desired option
(the default is "Off").