Fostex DV824 - Manual (Page 28)

28
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
When SHIFTed:
Pressing this key enters the contrast adjustment mode and you can adjust the
display contrast (
see page 22 for details ).
23) [MARK/CUE/0, symbol] key
Pressing this key during recording marks a cue on-the-fly ( see page 56 for
details ).
While the unit is not recording, pressing this key brings up the "CUE LIST"
menu screen and you can edit time data and cue label of a cue point.
When the display shows a screen for alphanumerical character entry, this key is
used for entering "0" or any symbol.
24) Transport control keys
[ PLAY] key
Pressing this key plays back the current drive (DVD-RAM drive or a partition of
the optional hard disk drive).
<Note>: While the refernce clock (“CLK” item) is set to “DIGI” or “WORD”, if
the FS of the playback file does not match the FS of the unit,
playback is not correctly done. In such a case, make the FS of the
unit match the FS of the playback file.
[ STOP/HOME] key
• Pressing this key stops recording/playback of the current drive.
If you press this key during recording with the Pre rec mode set to "ON", the
unit stops recording after "post recording" is took place.
• If the DVD-RAM drive is selected ad the current drive and the disk tray is
open, pressing this key closes the tray (i.e. acts the same as pressing the
[OPEN/CLOSE] key).
• Pressing this key exits any editing or setting mode and returns to show the
Home screen.
• Pressing the [F FWD] or [REWIND] key while holding down this key locates to
a specific position as below.
[STOP] + [F FWD]: Locates to the last recording position (REC END) of the
current audio file.
[STOP] + [REWIND]: Locates to the beginning (ABS 0) of the current audio
file.
[ REWIND] key
• Pressing this key while stopped starts fast-rewind at up to 30 times the
normal playback speed.
• Pressing this key during playback executes cueing playback.
• While stopped, pressing this key while holding down the [STOP] key locates
to the beginning (ABS 0) of the current audio file.
<Note>: The maximum cueing speed depends on the FS and the number of
tracks of a file.
[ F FWD] key
• Pressing this key while stopped starts fast-forward at up to 30 times the
normal playback speed.
• Pressing this key during playback executes cueing playback.