Fostex DV824 - Manual (Page 127)

127
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
Using the "Frame rate" menu item, you can select the time code frame rate for recording.
You can also select the TC frame rate using the quick setup mode.
Select the "Frame rate" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
23.97
29.97
29.97DF
24
25
American motion picture
American motion picture -0.1%
NTSC color with real time adjust
NTSC color
European film/PAL-SECAM video EBU (default setting)
30
30DF
NTSC video/film
NTSC video/film
Using the "Sync clock" menu item, you can select the system clock reference.
If you connect the DV824 to an external digital or video machine which does not have sync
clock output facility, use the DV824 internal clock as the system master clock.
You can also set the system clock reference using the quick setup mode.
INT
Digi in
Video
Word
The unit is referenced to external video clock received from the [WORD INPUT] connector
(available only when the optional TC/SYNC card is installed).
The unit is referenced to the internal clock master (default setting).
The unit is referenced to digital audio input signal.
The unit is referenced to external word clock.
System clock selection [Sync clock]
Details
TC frame rate selection [Frame rate]
Options Details
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
Select the "Sync clock" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
Options
<Note>: The "Video" option is available only when the optional TC/SYNC card is
installed.