Fostex DV824 - Manual (Page 125)

125
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
In the TC SETUP menu, 16 menu items for settings regarding time code recording/
playback and synchronization to an external device are available. These settings are
valid when the optional TC/SYNC card is installed to the unit.
Sync Clock
Frame Rate
Gen Mode
Set Gen TC
* Force JAM
Gen Ubit
Sel. TC OUT
Default LTC start
Edit LTC Start
Rep TC Ubit
Rep Pause TC
Menu item Setting/function
Selects the system clock. INT
Selects the generator mode of the internal TC generator. Rec Run
Sets TC generator start time and userbit when the generator mode is set
to Free Run or Rec Run.
-
Executes Force Jam to external time code while the generator mode is
set to Free Run. -
Selects userbit of output time code. <User>
Selects output time code source. Repro
Sets the default LTC start time when no external time code is fed to the
unit.
1h 00m 00s
Default
Selects the time code frame rate. 25
Sets the LTC start time of a playback file.
Sets userbit of playback time code.
-
EEEEERRR
Selects On/Off of time code output while paused. Off
JAM mode Selects the Jam mode when the generator mode is set to Free Run. BOTH
Ref TC Sel
Chase Mode
Chase Offset
BiPhase Setup
Selects the reference time code. LTC
Selects the chase mode of the unit against the reference time code.
Sets chase offset value.
Once
-
Makes settings required for synchronizing to a film machine. -
TC SETUP menu
<Note>: Details of the "Force JAM" menu item are described in "Advanced operations". See
page 81 for details .