Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 19)

Connector Informatio n
Logic Cables and Connectors
3–19 MMDS0508 Target Interface
Note these points:
• Pins 19 of both pods provide connection to an external ground.
• Pod A pin 17 is the external clock input for the emulator. To use this source, make
the desired clock connection to the white probe tip, then use the OSC command to
select an external source.
Table 3.2 . Pod and Logic Cable Pin Assignments
Pod Pin Pod A Signal Pod B Signal Probe Color
1 LC0 LC8 Brown (BRN)
2 GND GND
3 LC1 LC9 Red (RED)
4 GND GND
5 LC2 LC10 Orange (ORG)
6 GND GND
7 LC3 LC11 Yellow (YEL)
8 GND GND
9 LC4 LC12 Green (GRN)
10 GND GND
11 LC5 LC13 Blue (BLU)
12 GND GND
13 LC6 LC14 Purple (PUR)
14 GND GND
15 LC7 LC15 Gray (GRY)
16 GND GND
17 EXT_OSC TT_OSC White
18 GND GND
19 GND GND Black
20 GND GND
Freescale Semiconductor, Inc.
For More Information: www.freescale.com