Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 69)

App en dix
MMDS Commands
A–69 MMDS0508 Target Interface
A.1.3.15 Description
The GP command searches the analyzer trace buffer for a frame that matches the
defined search pattern. (Use the SP command to define the pattern.) A forward search
begins at the frame immediately following the current frame. A backward search
begins at the frame immediately preceding the current frame.
When the search finds a matching frame, the system positions the line cursor on the
frame, in the center of the screen. If no frame matches the pattern, the line cursor does
not move. If no search pattern is defined, this command searches for any pattern: that
is, the line cursor moves to the next line (or preceding line).
Example:
GP
Searches forward for the next frame that matches the search pattern.
Example:
GP ;B
Searches backward for the previous frame that matches the search pattern.
LT
A.1.3.16 Short Description
log trace.
A.1.3.17 Syntax
LT [range]
range
: The range of frames (decimal numbers) to be copied. Without a range value,
this command copies all frames in the trace buffer.
A.1.3.18 Description
The LT command copies contents of the bus analyzer trace buffer to the log file, in the
current view format. The target must be stopped to execute an LT command.
Example:
Freescale Semiconductor, Inc.
For More Information: www.freescale.com