Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 72)

App en dix
MMDS Commands
A–72 MMDS0508 Target Interface
!:
The inversion operator, which applies to a single address or data value. Specifying
!
sets a pattern on addresses or data values other than the specified address or data
value.
address:
Address part of the pattern, specified with an address constant:
address [:mask]
If you include a mask value, the system comparison involves only the address bits that
correspond to ones (1s) of the mask.
,:
The comma directs the analyzer to not include an address, data, or clips value in the
pattern definition. The omitted item matches any value of its type (so is a don’t care
entry).
data:
Data part of the pattern, specified as:
value [:mask]
If you include a mask value, the system comparison involves only the value bits that
correspond to ones (1s) of the mask.
A 15-bit value that defines MMDS0508 analyzer logic clip signals for the trigger,
specified as:
clips [ : mask ]
clips:
A 16-bit value that defines the logic clip signal values of the pattern, specified as:
clips [:mask]
If you include a mask, the system comparison involves only the value bits that
correspond to ones (1s) of the mask.
The bits of the clips and mask words are:
Bit: Signal: Bit: Signal:
0 Group A - BRN 8 Group B - BRN
Freescale Semiconductor, Inc.
For More Information: www.freescale.com