Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 32)

MMDS Target Componen t
4.8 MMDS0508 Menu Entries
4–32 MMDS0508 Target Interface
Figure 4.11 Memory Configuration
This dialog box shows the target’s memory setup. The system automatically loads this
setup if you check the Auto select according to MCU-Id checkbox. The debugger
identifies and sets the memory map through the processor MCU-Id. To open another
configuration, click the Open button. To save modifications to the current
configuration, click the Save... button.
4.8.3 Personality (.MEM) Files
For proper operation, the Motosil target must load the personality file (.MEM file) that
matches the connected Emulation Module (EM).
The .MEM file filename format is:
0nnnnVxx.MEM
where ‘nnnn’ is the four-digit, hexadecimal ‘MCU-Id’ number of the MCU, and ‘xx’
is a two-digit version number.
If the target cannot find this file, or if the file is not valid, the Error message box
appears as shown in
Figure 4.12 :
Freescale Semiconductor, Inc.
For More Information: www.freescale.com