9 default target setup, 1 motorola esl parameters, Default target setup – Freescale Semiconductor Target Interface MMDS0508 User Manual
Page 36: Motorola esl parameters, 9 default target setup, 1 motorola esl parameters
MMDS Target Componen t
4.9 Default Target Setup
4–36
MMDS0508 Target Interface
4.9 Default Target Setup
As with any target, you can use the Target menu to load the MMDS target component,
or you can set the MMDS target component as a default in the PROJECT.INI file.
This file should be in the project directory.
Example of PROJECT.INI file.
[DEFAULTS]
Window0=Source
0
0
50
40
Window1=Assembly
50
0
50
40
Window2=Register
50
40
50
30
Window3=Memory
50
70
50
30
Window4=Data
0
40
50
25
Window5=Command
0
65
50
20
Window6=Module
0
85
50
15
Target=Motosil
[Motorola ESL]
COMDEV=COM2
BAUDRATE=57600
SHOWPROT=1
NOTE
For more information about the PROJECT.INI file, please see the
debugger manual.
4.9.1 Motorola ESL Parameters
In normal use, you set these parameters in the project.ini file once, interactively,
during installation. You use these parameter values in subsequent debugging sessions.
4.9.1.1 COMDEV
This parameter specifies the host-computer communication port. COM1 is the default
communication device for PCs. The default for UNIX systems is /dev/ttya.
Freescale Semiconductor, Inc.
For More Information: www.freescale.com