Freescale Semiconductor Target Interface MMDS0508 - Manual (Page 29)

MMDS Target Comp onent
4.7 The Debugger Status Bar for the MMDS
4–29 MMDS0508 Target Interface
NOTE Saving the communication device and the baud rate through this
dialog box overrides environment variables BAUDRATE and
COMDEV of the default.env file.
4.6.2 Data Format
The MMDS0508 data format is 8 data bits, 1 stop bit, no parity, and a variable baud
rate. The default speed is 9600 baud, unless you change this default via the menu
selection MMDS0508>Communication....
Communication speeds of 1200 through 115200 baud are available, depending on the
host-computer hardware.
4.7 The Debugger Status Bar for the
MMDS
Once you have loaded the MMDS Target Component, the debugger status bar gives
specific information as shown in
Figure 4.8 :
Figure 4.8 The Debugger Status Bar
From left to right, this information is: the serial-communication baud rate, the
debugger running mode, the BUS analyzer mode, the MCU name (depending on the
MCU-Id), and the debugger status.
4.8 MMDS0508 Menu Entries
The Figure 4.9 show the MMDS0508 Menu Entries:
Freescale Semiconductor, Inc.
For More Information: www.freescale.com