Frymaster BIGLA30 - Manual (Page 33)

4-9
4.9 Fryer Setup Mode Programming
The computer, upon initial power up, when changing out a computer or accessed from Level 1, can
have parameters set. The setup sets the time, date, date format, language, fryer type, vat type, oil
system type and the temperature scale. These settings should only be changed by a technician.
The computer displays OFF.
1. Enter Level 1 programming mode by pressing the TEMP
and INFO buttons simultaneously until LEVEL 1 is
displayed. The computer displays ENTER CODE.
2. Enter 1234. 1 2 3 4
(1234)
The computer displays level 1 program for three seconds changing to Product
selection .
3. Press the
t
button once to scroll to FRYER SETUP.
4. Press the (1 yes) button.
The computer displays ENTER CODE.
5. Enter 1234. 1 2 3 4
(1234)
The computer displays LANGUAGE on the left and ENGLISH on the right.
6. Use the
3and 4buttons to scroll through the
language menu.
7. With the desired language selection displayed, press the (1 yes) button.
The computer displays TEMP Format on the left and F on the right.
8. Use the
3and 4buttons to toggle between F and C temperature scales.
NOTE: F is used for Fahrenheit, C is used for Celsius.
9. With the desired selection displayed, press the (1 yes) button.
The computer displays time format on the left and 12 hr on the right.