Frymaster BIGLA30 - Manual (Page 4)

i
LOV™ GAS WARRANTY STATEMENT
Frymaster, L.L.C. makes the following limited warranties to the original purchaser only for this
equipment and replacement parts:
A. WARRANTY PROVISIONS - FRYERS
1. Frymaster L.L.C. warrants all components against defects in material and workmanship for a
period of two years.
2. All parts, with the exception of the frypot, O-rings and fuses, are warranted for two years after
installation date of fryer.
3. If any parts, except fuses and filter O-rings, become defective during the first year after
installation date, Frymaster will also pay straight-time labor costs up to two hours to replace the
part, plus up to 100 miles/160 km of travel (50 miles/80 km each way).
B. WARRANTY PROVISIONS - FRYPOTS
1. Frymaster warrants the frypot assembly for fifteen (15) years. First ten (10) years parts and labor.
Years eleven (11) through fifteen (15) frypot only. Components attached to the frypot, such as the
high-limit, probe, gaskets, seals, ignitors and related fasteners, are also covered by the fifteen year
warranty if replacement is necessitated by the frypot replacement. Components that are not part of
the frypot assembly, such as the blower, gas valve, micro switches, doors and cabinetry are not
covered by the frypot warranty. Leaks due to abuse or from threaded fittings such as probes, sensors,
high-limits, drain valves or return piping are not included. If the frypot is found to be defective,
Frymaster will replace the frypot, allowing up to the maximum time per the Frymaster time allowance
chart hours of straight-time labor plus up to 100 miles/160 km of travel (50 miles/80 km each way) to
change the frypot.
2. This warranty is limited to fryers operating on natural or propane (LP) gas. Fryers that operate on
manufactured gas (also known as town gas or high-hydrogen gas) have a lifetime frypot warranty,
parts only.
C. WARRANTY PROVISIONS – COMBUSTION CHAMBERS
1. Frymaster L.L.C. warrants the combustion chambers against defective material or workmanship
for a period of ten years from the original installation date, parts and labor.
2. The combustion chamber consists of the infrared burners and the structural components to mount
the burners. This warranty does not cover ancillary components, including the igniter, blower,
high-limit thermostat, and temperature probe.
3. This warranty is limited to fryers operating on natural or propane (LP) gas.