FUJITSU PRIMERGY MX130 S2 - Manual (Page 107)

MX130 S2 Upgrade and Maintenance Manual 107
HDDs and accessible drives
7.10.2 Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê
Follow all procedures described in section "Opening the server" on page 48 .
Ê
Open the front cage as described in section "Opening the front cage" on
page 52 .
Ê
Locate the correct drive bay as described in section "Mounting order" on
page 82 .
7.10.3 Removing an additional 3.5-inch HDD out of the
5.25-inch ODD/HDD bracket
Figure 46: Cabling of HDD and ODD in 5.25-inch ODD/HDD bracket
Ê
Disconnect cables to the HDD.
1 Power cable connector P2 (see "Power cable T26139-Y4012-V211"
on page 239 )
2 SATA cable T26139-Y4028-V153
/
0 /
0
1
2