FUJITSU PRIMERGY MX130 S2 - Manual (Page 179)

MX130 S2 Upgrade and Maintenance Manual 179
10 Main memory
Safety notes
V
CAUTION!
●
Do not install unsupported third party memory modules. For further
information on supported memory modules, refer to section
"Basic
procedure" on page 180 .
●
Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
●
Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
●
Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
●
For further information, please refer to chapter "Important
information" on page 31 .
In this chapter
●
"Memory sequence" on page 180
●
"Operation modes" on page 181
●
"Installing memory modules" on page 182
●
"Removing memory modules" on page 184