FUJITSU PRIMERGY MX130 S2 - Manual (Page 142)

142 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.20 Replacing slimline ODD out of slimline
chassis bay
7.20.1 Required tools
●
Preliminary and concluding steps:
●
Removing accessible drives: tool-less
7.20.2 Preliminary steps
Before replacing an accessible drive, perform the following steps:
Ê
Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59 .
Ê
Remove all backup and optical disk media from backup and optical disk
drives as described in section
"Removing backup and optical disk media" on
page 60 .
Ê
Follow all procedures described in section "Opening the server" on page 48 .
Ê
Open the front cage as described in section "Opening the front cage" on
page 52 .