FUJITSU PRIMERGY MX130 S2 - Manual (Page 54)

54 Upgrade and Maintenance Manual MX130 S2
Basic hardware procedures
4.5 Closing the server
V
CAUTION!
●
Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
●
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY MX130 S2 server must not run while the server cover is
removed.
●
For further safety information, please refer to chapter "Important
information" on page 31 .
4.5.1 Mounting the server cover
Figure 9: Mounting the server cover
Ê
Fit the server cover on the chassis.