FUJITSU PRIMERGY MX130 S2 - Manual (Page 168)

168 Upgrade and Maintenance Manual MX130 S2
Expansion cards
9.2.3 Installing eSATA cable
9.2.3.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing expansion cards: tool-less
9.2.3.2 Preliminary steps
Before installing an expansion cable, perform the following steps:
Ê
Follow all procedures described in section "Opening the server" on page 48 .
Ê
Remove a PCI slot bracket as described in section "Removing a PCI slot
bracket" on page 162 .
9.2.3.3 Installing an eSATA cable (optional for specific markets)
Ê
Remove the eSATA cable from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the "Description - BIOS Manual D3090 / D3091".
Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes