8 system fan, System fan, 8system fan – FUJITSU PRIMERGY MX130 S2 User Manual

Page 145

Advertising
background image

MX130 S2

Upgrade and Maintenance Manual

145

8

System fan

Basic information

The PRIMERGY MX130 S2 server features one system fan module.

I

Additional fans in PSU and processor heat sink cannot be replaced
individually.

V

CAUTION!

Since the system fan is not redundant is has to be replaced immediately
in case of defects or pre-failure events.

Safety notes

V

CAUTION!

●

Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.

●

Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.

●

Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).

●

Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.

●

If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.

●

For further information, please refer to chapter

"Important

information" on page 31

.

Advertising