FUJITSU PRIMERGY MX130 S2 - Manual (Page 94)

94 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.6 Removing additional 3.5-inch HDD out of
3.5-inch chassis bay
7.6.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
– Phillips PH2 / (+) No. 2 screw driver
7.6.2 Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê
Follow all procedures described in section "Opening the server" on page 48 .
Ê
Open the front cage as described in section "Opening the front cage" on
page 52 .
Ê
Locate the correct drive bay as described in section "Mounting order" on
page 82 .