FUJITSU PRIMERGY MX130 S2 - Manual (Page 163)

MX130 S2 Upgrade and Maintenance Manual 163
Expansion cards
Figure 99: Removing the PCI slot bracket
Ê
Remove the slot bracket.
V
CAUTION!
Keep the slot bracket for further use.
Always replace slot brackets into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
9.2.1.4 Installing an expansion card
Ê
Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê
If applicable, attach the required slot bracket to the expansion card as
described in section
"Mounting expansion card slot brackets" on page 173 .