2 preliminary steps, 3 removing the processor heat sink, 4 removing the processor – FUJITSU PRIMERGY MX130 S2 User Manual
Page 192: Preliminary steps, Removing the processor heat sink, Removing the processor
Advertising
192
Upgrade and Maintenance Manual
MX130
S2
Processors
11.3.2 Preliminary steps
Before upgrading or replacing the processor, perform the following steps:
Ê
Disable BitLocker functionality as described in section
Ê
Follow all procedures described in section
"Opening the server" on page 48
.
11.3.3 Removing the processor heat sink
Refer to section
"Removing the processor heat sink" on page 189
for removing
the processor heat sink.
11.3.4 Removing the processor
Figure 119: Unlatching the socket lever
Ê
Unlatch the socket lever by pushing it slightly away from the socket.
Ê
Fold back the socket release lever.
Advertising