12 system board and components, System board and components – FUJITSU PRIMERGY MX130 S2 User Manual
Page 199
MX130 S2
Upgrade and Maintenance Manual
199
12
System board and components
This chapter provides information on how to replace the system board and
system board components as its CMOS battery and the Trusted Platform
Module (TPM).
Safety notes
V
CAUTION!
●
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
For further information, please refer to chapter
.
In this chapter
●
"Removing the CMOS battery" on page 201
●
"Installing the CMOS battery" on page 202
●
"Installing the TPM board" on page 204
●
"Removing the TPM board" on page 209
●