FUJITSU PRIMERGY MX130 S2 - Manual (Page 250)

250 Upgrade and Maintenance Manual MX130 S2
Appendix
15.3.1.2 Onboard settings
Figure 161: Jumper
9 USB-FRONT 3/4 USB connector for accessible backup drive
10 Dash USB 5/6 USB connector for Dash LAN cable
Setting Description
Default Password skip disabled and recovery BIOS disabled.
RCV Recovery BIOS enabled.
When the recovery BIOS is applied on a system board, the
password set by customers disappears from system board.
SKP Password skip enabled.
The password is deleted and the default BIOS settings are
applied after “Password skip” jumper was set once.
No. Print Description
1 2
HD-LED
Recovery
Reset
Power
On/Off
Power LED