FUJITSU PRIMERGY MX130 S2 - Manual (Page 223)

MX130 S2 Upgrade and Maintenance Manual 223
13 Front panel and front USB
Safety notes
V
CAUTION!
●
When inserting the front panel module into the server, ensure not to
pinch or strain any connected cables.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
For further information, please refer to chapter "Important
information" on page 31 .
In this chapter
●
"Replacing the front panel indicators" on page 224
●
"Replacing the front USB board" on page 229