Genicom GEK 00031B - Manual (Page 104)

Chapter 4. Printronix P Series Emulation GEK-00029B 104
DIFFERENCES FROM TARGET PRINTER EMULATION
Discarded Commands
The following commands from the target printer are parsed by the
current P-Series emulation and then discarded:
Select Extended Character Set (SFCC OSET;n)
The fonts required for this command were not available on the P-
Series.
Sequence discarded.
Download a Language (SFCC V)
The complete sequence SFCC V {QQQ} E {AAA} E {SSSSS} E (data) is
parsed and discarded and the number of characters specified by the
parameters as download data are also discarded.
Download a Character Shape (SFCC c)
The complete sequence SFCC c{PP} {SSSSSE} {A} (data) is parsed and
discarded and the number of characters specified by the parameters
as download data are also discarded.
Postnet Bar codes (SFCC |p*xxxxx-yyyy-zz*)
Sequence discarded.
Ribbon Minder Enable/Disable (SFCC r E/SFCC r D)
Sequence discarded.
Ribbon Minder Set Job Rate (SFCC r J nnnn E)
Sequence discarded.
Ribbon Minder Worn Message (SFCC r A n)
Sequence discarded.
NOTE
“Ribbon Minder” is a trade mark of Printronix, Inc.