Genicom GEK 00031B - Manual (Page 209)

GEK-00029B 5000 Series Programmer’s Manual 209
COMMAND DICTIONARY
ASCEF Announce Subset of Code Extension Facilities: This indicates
which subset of code extension facilities or what level of ISO 4873 is
used for subsequent exchanges of information. These three control
functions are macros that incorporate the effects of Select Character
Set (SCS) and Locking Shift (LS) commands.
Source: Printer
Destination: Application
Description
Level 1 and level 2 result in the following settings:
▪ ASCII is assigned to G0 and mapped into GL.
▪ ISO Latin-1 Supplemental is assigned to G1 and mapped into GR.
Level 3 results in the following settings:
▪ ASCII is assigned to G0 and mapped into GL.
Format
Mnemonic:
ESC SP L ISO 4873, level 1
Decimal: 27 32 76
Hex: 1B 20 4C
BASIC: CHR$(27);" L";
Mnemonic: ESC SP M ISO 4873, level 2
Decimal: 27 32 77
Hex: 1B 20 4D
BASIC: CHR$(27);" M";
Mnemonic: ESC SP N ISO 4873, level 3
Decimal: 27 32 78
Hex: 1B 20 4E
BASIC: CHR$(27);" N";
CPR Cursor Position Report: Response by a printer to an application for
a Printer Status Request (DSR) cursor position request. It returns the
current horizontal and vertical position via the serial connection.
Source: Printer
Destination: Application
Format
Mnemonic:
CSI Pn1 ; Pn2 R
Decimal: 155 Pn1 59 Pn2 82
Hex: 9B Pn1 3B Pn2 52
BASIC: CHR$(155);Pn1;";";Pn2;"R";
Description
The CPR parameters are defined as follows:
Pn1:
Numeric parameters describing the active vertical position.
Pn2: Numeric parameter describing the active horizontal position.