Genicom GEK 00031B - Manual (Page 51)

GEK-00029B 5000 Series Programmer’s Manual 51
Bar Code Readability Statement
The following information is provided to ensure that the best results
are obtained from your printed bar codes.
Use bar code readers designed to operate in the visible light
frequency range. Optional infrared-readable ribbon cartridges are
available.
Use bar code readers designed to read medium- or low-density bar
code symbols. Avoid readers with apertures less than 7 mils
(.007 inch or .18 mm).
Using bar code size parameters smaller than the default settings may
produce unacceptable results.