Genicom GEK 00031B User Manual

Page 173

Advertising
background image

GEK-00029A

5000 Series Programmer’s Manual

173

DECBLOCKC

Start Block Character Mode: Generates the block characters from
the characters that follow the sequence.
General Command Syntax
ESC % SP 1
Indeterminate Conditions
The block characters inherit the last set of parameters defined. If no
prior sequence exists, the block characters are printed with:

0 degree rotation

The U.S. ASCII character set

With a horizontal and vertical magnification factor of 2

With a white background

Decimal:

27 37 32 49

Hex:

1B 25 20 31

BASIC:

CHR$(27);”% 1”;

SOCS (Epson)

Select Other Coding System: Selects the Epson FX emulation.
General Command Syntax
ESC % SP 2

Decimal:

27 37 32 48

Hex:

1B 25 20 32

BASIC:

CHR$(27);”% 2”;

S7C1R

Select 7-Bit Code: In a 7-bit environment, this sequence allows
receipt of 7-bit control strings only.
General Command Syntax
ESC SP 6
Indeterminate Conditions
For all subsequent characters, the printer processes received 2-
character sequences as defined in the C0 control chart. If 8-bit C1
control characters are received, it drops the eighth bit and processes
the character as a C0 character.

Decimal:

27 32 54

Hex:

1B 20 36

BASIC:

CHR$(27);” 6”;

Advertising