Genicom GEK 00031B - Manual (Page 160)

Chapter 7. Dec LG/Compaq LG Plus Emulation GEK-00029B 160
RI Reverse Index: Moves the active line position up to the same position
on the preceding line. The Reverse Index command causes the active
position to stop at the top of the margin.
Decimal: 27 78 or 141
Hex: 1B 4D or 8D
BASIC: CHR$(27);CHR$(78); or CHR$(141);
SS2 Single Shift 2: Temporarily moves character set G2 into GL to print
one character.
Decimal: 27 69 or 142
Hex: 1B 4E or 8E
BASIC: CHR$(27);"N"
SS3 Single Shift 3: Temporarily moves character set G3 into GL to print
one character.
Decimal: 27 70
Hex: 1B 4F or 8F
BASIC: CHR$(27);"O"; or CHR$(143);
DCS Device Control String: Introduces a device control string.
Indeterminate Conditions
A DCS control character received in an escape sequence, control
sequence, or control string aborts the sequence and begins a new
device control string.
Decimal: 27 80 or 144
Hex: 1B 50 or 90
BASIC: CHR$(27);"P"; or CHR$(144);
CSI Control String Introducer: Introduces a sequence of one or more
bytes that constitute a control function.
Decimal: 27 91 or 155
Hex: 1B 5B or 9B
BASIC: CHR$(27);CHR$(91); or CHR$(155);
Indeterminate Conditions
A CSI control character received in an escape, control sequence, or
control string aborts the sequence and begins a new device control
string.
ST String Terminator: Indicates the end of a device control string (DCS).
Decimal:
27 92 or 156
Hex: 1B 5C or 9C
BASIC: CHR$(27);CHR$(92); or CHR$(156);