Genicom GEK 00031B - Manual (Page 215)

GEK-00029B 5000 Series Programmer’s Manual 215
DECCAVT Clear All Vertical Tabs: Clears vertical tab stops.
Source: Application
Destination: Level 2
(outmoded command)
Format
ESC 4
Description
See Tabulation Clear (TBC) with Ps = 4.
Notes to Software
This command is included for backwards compatibility with older
printers only. Conforming software should not use this command.
DECCRNLM Carriage Return /New Line Mode: Instructs the printer whether to
perform a Line Feed (LF) upon receipt of a Carriage Return (CR).
Source: Print manager Destination: Levels 2, 3
Format
CSI ? 4 0 h CR acts as New Line.
CSI ? 4 0 1 CR acts as Carriage Return.
Description
If DECCRNLM is set and a CR is received, the active position
advances to the Line Home Position of the next line. If DECCRNLM is
reset and a CR is received, the active position returns to the Line
Home Position of the current line.
Notes to Software
Print managers developed by Digital handle record terminators
without using Carriage Return/New Line Mode. This command is
available for third-party Print managers.
DECHTS Horizontal Tab Set: Executes Horizontal Tab Set (HTS).
Source: Application
Destination: Level 2(outmoded
command)
Format
ESC 1
Description
See HTS in the Control Characters section, p. 202.
Notes to Software
This command is included for backwards compatibility with older
printers only. Conforming software should not use this command.