Genicom GEK 00031B User Manual
Page 244
Chapter 8. PPL3 Plus Emulation
GEK-00029B
244
SHS
Set Horizontal Spacing: Selects character spacing for monospace
printing.
Source: Application
Destination: Level 3
Format
CSI Ps SP K
Description
Determines the Horizontal Advance Increment (HAI). If Proportional
Spacing Mode (DECPSP) is set, SHS has no immediate effect.
Select the SHS parameter as follows:
Ps
Centipoints
Characters/Inch
0
720
10
1
600
12
2
480
15
3
1200
6
SHS does not affect character size or horizontal tab stops.
The printer saves the HAI value upon receipt of SHS even when
DECPSP is set; however, it does not use the value until DECPSP is
reset.
The HAI value chosen remains in effect until one of the following
occurs:
▪
Another SHS command
▪
A Set Horizontal Pitch (DECSHORP) command
▪
A Spacing Pitch Increment (SPI) command
▪
Reset or power down