Genicom GEK 00031B User Manual
Page 35
GEK-00029B
5000 Series Programmer’s Manual
35
ESC ] 5
BFL (Begin Font Load): This sequence is not honored when self-test
determines that the download font option is not installed. Permits
downloading of customer-defined font characters into printer
nonvolatile memory from the host. Loading is terminated when an
ESC \ sequence is received.
Decimal:
27 93 53
Hex:
1B 5D 35
BASIC:
CHR$(27);"]5";
ESC [ p1 SP }
GENDFC (Download Font Control): Using the serial interface, this
command allows the host to see if at least one valid font is loaded
(p1=2). The printer sends DCS 30H 30H ST if a font is loaded,
DCS 44H 45H ST if no font is loaded. It also provides the capability to
erase the download font area (p1=1).
Decimal:
27 91 <p1> 32 125
Hex:
1B 5B <p1> 20 7D
BASIC:
CHR$(27);"[<p1>}";