Genicom GEK 00031B - Manual (Page 235)

GEK-00029B 5000 Series Programmer’s Manual 235
HPR Horizontal Position Relative: Moves the active position to the right
a specified number of units.
Source: Application
Destination: Levels 2, 3
Format
CSI Pn a
Description
Select Pn as follows:
Pn Meaning
0 Interpreted as 1
n Number of units, depending on Positioning
Unit Mode (PUM) and Select Size Unit (SSU).
When lining attributes are invoked by Select Graphic Rendition
(SGR), HPR underlines, double underlines, overlines, or strikes
through text from the current position to the target position.
The First Character Flag has no effect on HPB.
Error Handling
If the resulting position would be to the right of the Right Margin
Position, the printer sets the horizontal position equal to the Right
Margin Position and sets the Right Margin Flag.
When the Right Margin Flag is set, the command is ignored.
If Pn moves the current horizontal position to the left of the left
margin, the active position is set to the left margin.
Double underline and strike through are not supported.