Genicom GEK 00031B - Manual (Page 152)

Chapter 6. Epson FX286-E Emulation GEK-00029A 152
FX-286E DOT GRAPHICS CONTROL SEQUENCES
ESC K n1 n2 v1...vn Normal Density Graphics: Sets a density of 60 dpi horizontally and
72 dpi vertically.
Decimal: 27 75 n1 n2 v1...vn
Hex: 1B 4B n1H n2H v1H...vnH
BASIC: CHR$(27);"K";CHR$(n1);CHR$(n2);CHR$(v1);...;
CHR$(vn);
ESC L n1 n2 v1...vn Low-Speed Double-Density Graphics: Sets a density of 120 dpi
horizontally and 72 dpi vertically. If horizontally-adjacent dots are
sent, they will be printed.
Decimal: 27 76 n1 n2 v1. vn
Hex: 1B 4C v1H ... vnH
BASIC: CHR$(27);"L";CHR$(n1);CHR$(n2);CHR$(v1);...;
CHR$(vn);
ESC Y n1 n2 v1...vn High-Speed Double-Density Graphics: Sets a density of 120 dpi
horizontally and 72 dpi vertically. If horizontally adjacent dots are
sent, they will be printed.
Decimal: 27 89 n1 n2 v1 ... vn
Hex: 1B 59 n1H n2H v1H ... vnH
BASIC: CHR$(27);"Y";CHR$(n1);CHR$(n2);CHR$(v1);...;
CHR$(vn);
ESC Z n1 n2 v1...vn Quadruple-Density Graphics (Reduced Speed): Sets a density of
240 dpi horizontally and 72 dpi vertically. If horizontally adjacent
dots are sent. they will be printed.
Decimal: 27 90 n1 n2 v1 ... vn
Hex: 1B 5A n1H n2H v1H v2H
BASIC: CHR$(27);"Z";CHR$(n1);CHR$(n2);CHR$(v1) ... (v2)