Sony PMW-F3K User Manual

Page 112

Advertising
background image

Setup Menu List

112

Me

n

u

C
o

nf

igur

at

io

n

a

nd Det

a

ile
d Set

tings

Rec Review

Setting the
playback time for
Rec-Review

3 sec / 10 sec / Clip

Set the time to play the last recorded clip using the Rec-
Review function.
3 sec: Last 3 seconds
10 sec: Last 10 seconds
Clip: Entire duration of the clip

TLCS

Setting the Total
Level Control
System (auto
adjustment system
of gain, iris and
shutter)

Note

The auto iris
control function
does not operate at
present.

Level

+1.0 / +0.5 / ±0 / –0.5 / –1.0

Set the target level (to make brighter or darker) of auto iris
control in TLCS. (This setting also affects the gain control in
AGC mode and shutter-speed control in Auto Shutter mode.)
+1.0: Approx. one stop further open
+0.5: Approx. half a stop further open
±0: Standard
–0.5: Approx. half a stop further closed
–1.0: Approx. one stop further closed

Mode

Backlight / Standard /
Spotlight

Set the auto iris control mode in TLCS.
Backlight: Backlight mode to reduce darkening of the center

subject against lights

Standard: Standard mode
Spotlight: Spotlight mode to reduce blown-out highlights on

the center subject in the spotlight

Speed

–99 to +99 (+50)

Set the tracing speed of TLCS control.

AGC

On / Off

Turn the AGC (Auto Gain Control) function on/off.

AGC Limit

3 / 6 / 9 / 12 / 18 dB

Set the maximum gain in AGC.

AGC Point

F2.8 / F4 / F5.6

Set the iris point for switching to auto-iris and auto-shutter
control when AGC is on.

Auto Shutter

On / Off

Turn the Auto Shutter control function on/off.

A.SHT Limit

1/100
1/150
1/200
1/250

Set the maximum shutter speed in Auto Shutter control.

A.SHT Point

F5.6 / F8 / F11 / F16

Set the iris point for switching auto-iris and auto-shutter
control when Auto Shutter is on.

Shockless
White

Setting the
shockless white
balance

Off / 1 / 2 / 3

Select the speed of change in white balance when the white
balance mode is switched.
Set to “Off” to instantly change the white balance.
Select a larger number to change the white balance more
slowly through interpolation.

White Switch
<B>

Setting for the
WHITE
BALANCE switch

ATW / MEM

Select the mode (ATW or Memory B) selected at the B
position of the WHITE BALANCE switch.

ATW Speed

Setting for Auto
Tracing White
Balance

1 / 2 / 3 / 4 / 5

Set the tracing speed of ATW.
The larger the number you set, the speed becomes faster.

CAMERA SET

Menu items

Subitems and setting values

Contents

Advertising
This manual is related to the following products: