Audio set menu – Sony PMW-F3K User Manual

Page 113

Advertising
background image

Setup Menu List

113

Me

n

u

C
o

nf

igur

at

io

n

a

nd Det

a

ile
d Set

tings

Horizontal Inv.

Setting the image
inversion function

On / Off

Set to “On” to horizontally invert the image.

Lens IF

Selecting the lens
interface

Type C / Type A / Off

Select the appropriate lens interface in advance before
attaching a lens.
Type C: For lenses with a Cooke-type connector and those

supplied with the PMW-F3K

Type A: For lenses with a ARRI-type connector
Off: For other lenses

CAMERA SET

Menu items

Subitems and setting values

Contents

AUDIO SET Menu

AUDIO SET

Menu items

Subitems and setting values

Contents

Audio Input

Setting for audio

inputs

TRIM CH-1

–20 dBu to –65 dBu (–41 dBu)

Finely adjust the sensitivity of channel 1 of microphone input
in steps of 3 dB in Manual audio adjustment mode.

TRIM CH-2

–20 dBu to –65 dBu (–41 dBu)

Finely adjust the sensitivity of channel 2 of microphone input
in steps of 3 dB in Manual audio adjustment mode.

Limiter

On / Off

Turn the audio limiter on/off.

MIC AGC

High / Low

Select the sensitivity of the microphone inputs.

AGC Link

Linked / Separated

Select the gain link condition when the audio level adjustment
is in AGC mode.
Linked: To vary the CH-1 gain and the CH-2 gain in

synchronization.

Separated: To vary the CH-1 gain and the CH-2 gain

independently according to the respective levels.

1KHz Tone

On / Off

Turn the 1-kHz reference tone signal on/off.

Wind Filter CH-1

On / Off

Turn the wind filter for channel 1 on/off.

Wind Filter CH-2

On / Off

Turn the wind filter for channel 2 on/off.

EXT CH Select

CH-1
CH-1/CH-2

CH-1: To record channel 1 audio input on both channels 1

and 2.
It is recommended to set the AUDIO SELECT (AUTO/
MANUAL) switch and AUDIO LEVEL control for CH-2
(page 56) as well as the above TRIM CH-2 to the same
conditions as those for CH-1.

CH-1/CH-2: To record channel 1 and channel 2 inputs on the

respective channels.

Advertising
This manual is related to the following products: