Storing/retrieving the setting data, Setup file, Storing the setup file – Sony PMW-F3K User Manual

Page 131: Retrieving the setup file, Resetting to the standard values

Advertising
background image

Setup File

131

St

or

in

g

/R

e

tri

e

vi

n

g

the Set

ting D

a

ta

You can store all the menu settings (including
picture profiles) as a setup file on an SxS memory
card.
By retrieving the stored setup file, the proper
setup condition can be immediately obtained.
For the setup file operations, use “Camera Data”
of the OTHERS menu.

Note

The Clock Set, Time Zone, Hours Meter values
are excluded.

Only one setup file can be stored on one SxS
memory card.

1

Insert a memory card on which you
wish to store the setup file to a card slot.

Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.

2

Select “Camera Data” from the
OTHERS menu.

3

Select “Store.”

“Cancel” and “Execute” appear to the right.

4

Select “Execute.”

Writing of data to the memory card begins.
An in-progress message is displayed during
writing. When writing is completed, a completion
message is displayed.

Notes

• If a setup file already exists on the memory card

you specified in Step

1

, a message to confirm

whether to overwrite the file is displayed.

• If there is not sufficient space on the memory

card, an error message is displayed.

When you retrieve the stored setup file, the
camcorder settings are changed according to the
file.

1

Insert the memory card on which you
stored the setup file into a card slot.

Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.

2

Select “Camera Data” from the
OTHERS menu.

3

Select “Recall.”

“Cancel” and “Execute” appear to the right.

4

Select “Execute.”

Reading of data from the memory card begins.
An in-progress message is displayed during data
reading. When the read-out is completed, a
completion message is displayed, indicating that
the camcorder settings have been changed
according to the setup file.

The current camcorder settings you made through
various menu and button operations can be
collectively returned to the standard statuses
(factory settings) by executing “All Reset” of the
OTHERS menu.

Storing/Retrieving the Setting Data

Setup File

Storing the Setup File

00:00

Store

Recall

OTHERS

A l l

Reset

Camera Data

LUT Memory
3D-Link Mode : Off
ND Adjustment
Time Zone : UTC +09:00

B

B

B

B

Retrieving the Setup File

Resetting to the Standard Values

Advertising
This manual is related to the following products: