Using external inputs or optional microphones, Using the ir remote commander, Before use – Sony PMW-F3K User Manual

Page 32

Advertising
background image

Using the IR Remote Commander

32

P

repa

ra

ti

ons

switch for CH-1 to MIC+48V and that for CH-2
to MIC.

Sony-made microphones which support both
stereo and monaural modes
• Microphone supplied with this camcorder
• ECM-680S

Connect external audio sources or external
microphones to the AUDIO IN connectors CH-1
and CH-2, then set the LINE/MIC/MIC+48V
switches CH-1 and CH-2 to the appropriate
position.
LINE: For audio a audio line source (Line level:

+4 dBu)

MIC: For a microphone that requires no power

supply

MIC+48V: For a microphone that requires +48V

power supply

Before use

Before you use the supplied IR Remote
Commander for the first time, pull out the
insulation sheet from the battery holder.

A CR2025 lithium battery is set in the holder at
the factory.

To use the IR Remote Commander

For controlling the camcorder from the IR
Remote Commander, activate the remote control
function of the camcorder after turning the power
on.
Activating/deactivating the remote control
function can be achieved using the Setup menu or
an assignable button.

To activate using the menu
Press the MENU button to set the camcorder to
Menu mode, select

(the OTHERS menu)

and set “IR Remote” to “On.”

For details on menu operations, see “Basic Menu
Operations” on page 107.

To activate using an assignable button
Assigning “IR Remote” to one of the assignable
buttons permits you to activate/deactivate the
remote control function by pressing the button.

For the assignable buttons, see“Changing Functions
of the Assignable Buttons” on page 61.

Using External Inputs or Optional
Microphones

Using the IR Remote
Commander

Insulation sheet

00:00

OTHERS

Clock Set
Language : Eng l i sh
Assign Bu t t on
Ta l l y
Hours Meter

IR

Remote

: O n

Bat te r y Alarm

O n

O f f

B

B
B
B

B

B

Advertising
This manual is related to the following products: