Cueing up, Adding shot marks during playback (hd mode) – Sony PMW-F3K User Manual

Page 91

Advertising
background image

Playing Back Clips

91

P

la

y

bac

k

Each time you press the button, the playback
speed switches between 4 times, 15 times and 24
times normal speed.

To return to normal playback
Press the PLAY/PAUSE button.

To return to the top of the current clip
Press the PREV button.
• When you press the button in normal or fast-

forward playback, the top of the current clip is
cued up then playback begins.

• When you press the button in fast-reverse

playback or in Pause mode, the top of the
current clip is cued up, then the still picture is
displayed.

• Repeated pressing of the button cues up the

previous clips one by one.

To start playback from the top of the first clip
Press the PREV button and F REV button
simultaneously. The top of the first-recorded clip
on the memory card is cued up.

To jump to the top of the next clip
Press the NEXT button.
• When you press the button in normal or fast-

forward playback, the top of the next clip is
cued up then playback begins.

• When you press the button in fast-reverse

playback or in Pause mode, the top of the next
clip is cued up, then the still picture is displayed.

• Repeated pressing of the button cues up the

subsequent clips one by one.

To start playback from the top of the last clip
Press the F FWD button and NEXT button
simultaneously. The top of the last-recorded clip
on the memory card is cued up.

In the same manner as in recording, you can add
shot marks to the clip during playback.

At the point where you wish to add a shot
mark, press the “Shot Mark1” or “Shot
Mark2” assigned button, or the
SHOTMARK 1 or 2 button on the IR
Remote Commander.

Notes

• No shot mark can be added if the memory card

is write-protected.

• No shot mark can be added to the first or last

frame of a clip.

Cueing Up

Adding Shot Marks During
Playback (HD Mode)

Advertising
This manual is related to the following products: