Inserting/removing an sxs memory card, Open the cover, Close the cover – Sony PMW-F3K User Manual

Page 35: Lamp slot statuses

Advertising
background image

Handling SxS Memory Cards

35

P

repa

ra

ti

ons

Note

Do not operate the write-protect switch of an SxS
memory card while it is set in the camcorder.
Temporarily remove the card from the camcorder
before changing the switch setting.

Inserting an SxS memory card

1

Open the cover.

2

Insert the SxS memory card into the
slot.

The access lamp lights in red then changes to
green once the memory card is ready for use.

3

Close the cover.

Status indications by the access lamps
Card slots A and B are accompanied by the
respective access lamps to indicate their statuses.

Removing an SxS memory card

1

Open the cover, once press the eject
button to release the lock, then pull the
button out.

Inserting/Removing an SxS
Memory Card

Write-protect switch

SLOT SELECT

ON OFF

A

B

SLOT SELECT button

Card slots

Access lamps

Eject buttons

Cover

Lamp

Slot statuses

Lights in
red

Accessing the loaded SxS memory card
(writing/reading data)

Lights in
green

Standby (ready for recording or
playback using the loaded SxS memory
card)

Off

• No SxS memory card is loaded.
• The loaded card is invalid.
• An SxS memory card is loaded, but

another slot is active.

MENU

SEL/SET

CAN

ON

SLOT S

ELECT

OFF

PICTURE P

A

B

DC IN

With the label facing right

MENU

SEL/SET

CAN

ON

SLOT S

ELECT

OFF

PICTURE P

A

B

DC IN

Press and unlock the button.

Advertising
This manual is related to the following products: