Sony PMW-F3K User Manual

Page 116

Advertising
background image

Setup Menu List

116

Me

n

u

C
o

nf

igur

at

io

n

a

nd Det

a

ile
d Set

tings

SDI/HDMI Out
Display

Setting the
character
information for
digital outputs

On / Off

Set whether to add the same menus and status indications as
those on the LCD monitor/viewfinder screen to the output
signals from the SDI OUT and HDMI OUT connectors.

Note

On the thumbnail, EXPAND CLIP and SHOT MARK
screens, the same menus and status indications as those on the
LCD monitor/viewfinder screen are displayed regardless of
the setting of this item.

Video Out
Display

Setting the
character
information for the
composite output

On / Off

Set whether to add the same menus and status indications as
those on the LCD monitor/viewfinder screen to the output
signal from the VIDEO OUT connector.

Note

On the thumbnail, EXPAND CLIP and SHOT MARK
screens, the same menus and status indications as those on the
LCD monitor/viewfinder screen are displayed regardless of
the setting of this item.

Down
Converter

Selecting the
operation mode of
the down converter

Squeeze / Letterbox / Edge
Crop

Set the output mode (aspect) for SD signals
Squeeze: To horizontally reduce a 16:9 picture to output a 4:3

picture

Letterbox: To mask the upper and lower areas of a 4:3 picture

to display a 16:9 picture in the center of the screen

Edge Crop: To cut the both sides of a 16:9 picture to output a

4:3 picture

23.98P Output

Selecting Output

mode

59.94i (2-3PullDown)/
23.98PsF

Select the video output format when the video format is HQ
1920/23.98P or HQ 1440/23.98P (invalid with video formats
other than HQ 1920/23.98P and HQ 1440/23.98P).

Dual-Link &
Gamma Select

Setting the dual-
link output

Off / 1.5G YPbPr422 & Video

Set the output from the HD SDI A/B connectors.
Off: No signal output
1.5G YPbPr422 & Video: To output 1.5G Dual-Link HD-SDI

signal using both the A and B connectors.

Note

The following choices become available when the CBK-
RGB01 RGB and S-LOG Output Option is installed.

1.5G RGB444 & Video
1.5G RGB444 & S-Log
3G YPbPr422 & Video
3G RGB444 & Video
3G RGB444 & S-Log

S-LOG LUT
Select

Setting the MLUT
for S-LOG output

Off /
P1: 709 (800%) /
P2: HG8009G40 /
P3: HG8009G33 /
P4: 709 (180%) /
U1: 709 (180%) /
U2: 709 (180%) /
U3: 709 (180%) /
U4: 709 (180%) /
U5: 709 (180%)

Select the MLUT (Monitor Look Up Table) to be applied to
the video signals with S-LOG except for the signals of Dual-
Link output (signals recorded on the camcorder, and signals
output from the SDI output, HDMI output, Video output, and
i-LINK output)
Off: MLUT not applied (original S-LOG is output)
709 (800%): Gamma 709 with 800% dynamic range
HG8009G40: Hypergamma with 800% dynamic range
HG8009G33: Hypergamma with 800% dynamic range
709 (180%): Gamma 709 with 800% dynamic range

VIDEO SET

Menu items

Setting values

Contents

Advertising
This manual is related to the following products: